The VirtualPc type exposes the following members.
Sets the bus to which the drive will be attached. 0 = The drive will be attached to the first bus. 1 = The drive will be attached to the second bus.
Sets the device to which the drive will be attached. 0 = The drive will be attached to the first device on the bus. 1 = The drive will be attached to the second device on the bus.
Sets the FileName
Sets the MaxCpuThreshold in seconds. This is the period for which the virtual machine must be below the MaxCpuUsage. Default is 10.
Sets the MaxCpuUsage in %. Default is 10
Sets the name of the VirtualPc
Gets the Result
Sets the TaskAction.(Overrides BaseTask..::..TaskAction.)
Sets the Text collection
Gets the number of virtual machines found
Gets the collection of Virtual Machines. See the sample for available metadata
The time, in milliseconds, that this method will wait for task completion before returning control to the caller. A value of -1 specifies that method will wait until the task completes without timing out. Other valid timeout values range from 0 to 4,000,000 milliseconds.